|
Post by mazdax3speed on Aug 10, 2006 19:45:41 GMT -5
|
|
|
Post by vwvr604 on Aug 11, 2006 1:17:39 GMT -5
link didnt work, but i would like the offset look as well but i guess its up to you whether u trade ur flow for a certain look...
|
|
|
Post by boostfed on Aug 11, 2006 8:10:15 GMT -5
they're supposed to do some shit with torque multiplication and some other bullshit. a friend of mine had the real Mugen loop exhaust on his Si civic and umm... yeah, just another way for companies to make money in my opinion. thats too many restrictions for a turbo car. just get something with a 3in inlet so that you can have 3in all the way through on the exhaust.
|
|
|
Post by piso on Aug 11, 2006 11:16:01 GMT -5
tony you stole my next plan. im getting a single pipe from my cat thats 3 inches and im gonna bend it back to a new straight through 3 inch muffler. i agree with the straightthrough design though, no restriction and it will sound nice and look good off-set
|
|
|
Post by boostfed on Aug 11, 2006 14:34:32 GMT -5
tony you stole my next plan. im getting a single pipe from my cat thats 3 inches and im gonna bend it back to a new straight through 3 inch muffler. i agree with the straightthrough design though, no restriction and it will sound nice and look good off-set umm... except that 3 inch exhaust will do nothing to that corolla except kill any low end power. that car is never going to need more than 2.25 until its forced induction. dont waste your money on 3in, thats for the big boys with boost... Tony, i thought about it the other night. if there is clearance to go under the rear suspension, you could to the angle'd up n crooked exhaust. we need to check it out though, see if you even have ground clearance enough to throw some fat 3 inch under there.
|
|
|
Post by mazdax3speed on Aug 11, 2006 16:19:45 GMT -5
im not sure if theres enough room for an under axle setup, the only car ive really seen it on its kyles dads 86, and that pipe was hangin low. i guess we could measure im just lookin for somthin that stands out a little, canisters arent really much on the eyes, but that tanabe and a few magnaflows are a kinda nice look, almost like what i have, but less of a tip, and a smaller oval muffler
|
|
|
Post by piso on Aug 12, 2006 8:52:25 GMT -5
that would look nice and yea, the tanabe is nice looking
|
|
|
Post by vwvr604 on Aug 12, 2006 20:14:13 GMT -5
hey piso, deff dont go for too big piping man, u dont wanna LOSE any power, atleast not with that car..this is ofcourse if ur still planning on doing this even after all these engine problems ur having
|
|
|
Post by boostfed on Aug 13, 2006 2:50:03 GMT -5
piso, if you want some advice on that motor and anything to make power, PM me or somethin, i can give you names, adresses and or options for nearly any part you could need for that car. they are availible, you just gotta look\.
|
|